How To Fix Water Damaged Electronics

5/27/2022 (Permalink)

Electronic damage can be repaired if you properly remove the devices from the water and dry them thoroughly.

How To Safely Remove Flooded Electronics

If your electronics have recently been damaged by water, you may still be able to save them. Business owners in Bellerose, NY, should know how to safely remove flooded electronics from water and how to repair electronic damage.

Risks
Handling flooded electronics presents several risks:

• Electrocution
  
• Fire
  
• Smoke
  
• Chemical hazards
  
  

You should always exercise extreme caution when dealing with damaged devices. If you do not know how to handle the electronics or feel that your safety may be at risk, call a water damage repair specialist in Bellerose, NY, to assist you.

Removing Electronics
The first thing you need to do is remove the damaged electronics from the water. If the device is plugged into an outlet, you should turn off the power in the area to avoid electrocution. If the device is submerged in water or you are in contact with any flooding, make sure there is no risk of electrocution before handling any electronics. Be cautious when handling battery-powered devices as well. If they are warm, smoking or behaving strangely, the damaged batteries may be fire or chemical hazards.

Drying the Device
Once you have removed the device from the water and turned it off, you can begin drying the device. You should first allow the liquid to drain by turning the device over several times and gently shaking it.
Next, you will want to disassemble the damaged electronics as much as possible, starting with removing the batteries if applicable. This will allow you to clean the inside of the device and allow the components to dry fully before reassembling. Before reassembling, you may also need to clean the circuit boards and replace damaged batteries with new ones.
If the electronics do not work after completing these steps, you may need to consult a water damage restoration specialist or an electrician to see if they are salvageable.
Electronic damage can be repaired if you properly remove the devices from the water and dry them thoroughly. You should always use caution when handling flooded electronics to avoid risks of electrocution, fire, smoke and chemical hazards.